FC101HP X-RAY GENERATOR
As Metal Ceramic x-ray tubes have evolved Gulmay has developed its product in 3 phases to culminate in a single drive platform capable of powering up to 1000 W and with options of single or dual filament and unipolar or bipolar tube connection.
The current drive platform is based on the ‘FC’ family using IGBT’s at 25 kHz with reduced air inflow to facilitate operation in harsher conditions.
Back to FC Series
|Maximum Power||1000 W|
|kV Range||5 – 100 kV|
|kV Accuracy||± 1% of Demand Value|
|kV Reproducibility||Better Than ± 0.05 kV|
|High Voltage Ripple||Less Than 5.0V/mA with 10M High Voltage Cable|
|mA Range||0 – 16 mA|
|mA Accuracy||± 0.5% of Demand Value|
|mA Reproducibility||Better Than 2µA|
|Input Voltage||220 V ±10% 47 – 63 Hz|
|Input Current||10.6 A at 220 V|
|Dimensions Cathode (W x H X D)||340 x 473 x 436 mm|
|Storage Temperature||-40° C to + 70° C|
|Operational Temperature||0°C to + 40°C|
|Comms||Analogue / RS232 / RS422|
Please fill out this form if you would like more information about the FC101HP X-Ray Generator.